10. ETFA 2005: Catania, Italy

• Fumio Harashima:
  Human Adaptive Mechatronics - Interaction and Intelligence.
  
• Cássia Yuri Tatibana, Rômulo Silva de Oliveira, Carlos Montez:
  Dynamic guarantee in component-based distributed real-time systems.
  
• Sandro Santos Andrade, Raimundo José de Araújo Macêdo:
  A component-based real-time architecture for distributed supervision and control applications.
  
• Patricia Della Mea Plentz, Rômulo Silva de Oliveira, Carlos Montez:
  Scheduling of the distributed thread abstraction with timing constraints using RTSJ.
  
• Mohamed Khalgui, Xavier Rebeuf, F. Zampognaro:
  Adaptable OPC-XML contracts taking into account network traffic.
  
• Kleanthis Thramboulidis, A. Zoupas:
  Real-time Java in control and automation: a model driven development approach.
  
• Y. Veryha:
  Going beyond performance limitations of OPC DA implementation.
  
• Lucia Lo Bello, Orazio Mirabella:
  Communication techniques and architectures for Bluetooth networks in industrial scenarios.
  
• R. Brito, Yeqiong Song:
  A dispatching mechanism providing REMPLI applications with QoS.
  
• Nicolas Krommenacker, Vincent Lecuire:
  Building industrial communication systems based on IEEE 802.11g wireless technology.
  
• Andreas Willig:
  Scheduling multiple streams with (m, k)-firm deadlines having different importance over Markovian channels.
  
• Andreas Miaoudakis, A. Lekkas, Grigorios Kalivas, Stavros A. Koubias:
  Radio channel characterization in industrial environments and spread spectrum modem performance.
  
• Paulo Bartolomeu, José Alberto Fonseca, P. Duarte, Paulo Maria Rodrigues, Luís Miguel Girão:
  MIDI over Bluetooth.
  
• Arndt Lüder, Christian Schwab, Marcus Tangermann, Jörn Peschke:
  Formal models for the verification of IEC 61499 function block based control applications.
  
• D. Pollmacher, W. Zimmermann, Hans-Michael Hanisch:
  Translation validation for model-based code-generators for PLCs.
  
• Andrei Lobov, Jose L. Martinez Lastra, Reijo Tuokko:
  On controller and plant modeling for model-based formal verification.
  
• Valeriy Vyatkin, Hans-Michael Hanisch:
  Reuse of components in formal modeling and verification of distributed control systems.
  
• Robert Wójcik, K. Bzdyra, Manuel M. Crisóstomo, Zbigniew A. Banaszak:
  Constraint programming approach to design of deadlock-free schedules in concurrent production systems.
  
• A. Wegrzyn:
  Parallel algorithm for computation of deadlocks and traps in Petri nets.
  
• Francesco Maria Raimondi, T. Raimondi, P. Barretta:
  Neural Petri control: an application on a mobile robot.
  
• Nicola Cesario, M. Lavorgna, Francesco Pirozzi:
  Modelling on-off virtual lambda sensors based on multi-spread probabilistic neural networks.
  
• Guido Maione, Michele Ottomanelli:
  A preliminary Petri net model of the transshipment processes in the Taranto container terminal.
  
• Luigi Fortuna, Salvatore Graziani, Maria Gabriella Xibilia:
  Cross correlation analysis of residuals for the selection of the structure of virtual sensors in a refinery.
  
• Francesco Maria Raimondi, Ludovico S. Ciancimino, Maurizio Melluso:
  On-line adaptive neural network in very remote control system.
  
• Riccardo Caponetto, Luigi Fortuna, Alessandro Rizzo:
  Neural network modelling of fuel cell systems for vehicles.
  
• Kenzo Kurihara, Nobuyuki Nishiuchi, J. Hasegawa, Kazuaki Masuda:
  Mobile robots path planning method with the existence of moving obstacles.
  
• J. Almeida, A. Almeida, R. Araujo:
  Tracking multiple moving objects for mobile robotics navigation.
  
• Giancarlo Iannizzotto, Francesco La Rosa, Pietro Lanzafame:
  An edge-based segmentation technique for 2D still-image with cellular neural networks.
  
• Herbert F. Schweinzer, Peter Krammer:
  Scene analysis with ultrasonic sensors.
  
• Armando J. Sousa, J. Paulo Costa, A. Paulo Moreira, A. S. Carvalho:
  Self localization of an autonomous robot: using an EKF to merge odometry and vision based landmarks.
  
• Salvatore Pennacchio, Davide Rizzo:
  Intelligent traction control for wheeled space vehicles.
  
• Alfred C. Weaver:
  Distributed Data Security for Factory Automation. 243-244
  
• K. Loeis, Mohammed Bani Younis, Georg Frey:
  Application of symbolic and bounded model checking to the verification of logic control systems.
  
• G. Pratl:
  A bionic approach to artificial perception and representation in factory automation.
  
• Daniela Micucci, Marco Oldani, Francesco Tisato:
  Real-time reasoning: the case of surveillance systems.
  
• K. M. Deliparaschos, F. I. Nenedakis, Spyros G. Tzafestas:
  A fast digital fuzzy logic controller: FPGA design and implementation.
  
• Marek Miskowicz:
  Sampling of signals in energy domain.
  
• Francesco Basile, Alessandro Giua, Carla Seatzu:
  Decentralized supervisory control of Petri nets with monitor places.
  
• Daniele Corona, Alessandro Giua, Carla Seatzu:
  Quantized optimal control of discrete-time systems.
  
• José Yépez, Pau Martí, J. Ayza, Josep M. Fuertes:
  LEF closed-loop scheduling policy for real-time control systems.
  
• Luís Gomes, João Paulo Barros, Anikó Costa, Rui Pais, Filipe Moutinho:
  Towards usage of formal methods within embedded systems co-design.
  
• Vincenza Carchiolo, Alessandro Longheu, Michele Malgeri:
  Production workflows: a model for reuse.
  
• Ulrich Berger, Raffaello Lepratti, M. May:
  An approach for the automatic generation of robot paths from CAD-data.
  
• A. Tuneski, D. Babunski:
  Adaptive identification of the environment characteristics in the contact tasks.
  
• E. R. Cassemiro, J. M. Rosario, Didier Dumur:
  Robot axis dynamics control using a virtual robotics environment.
  
• Luca Ferrarini, Carlo Veber, Giuseppe Fogliazza:
  IEC 61499 implementation of a modular control model for manufacturing systems.
  
• Jose L. Martinez Lastra, Andrei Lobov, L. Godinho:
  Closed loop control using an IEC 61499 application generator for scan-based controllers.
  
• M. Bruccoleri, C. D'Onofrio, U. La Commare, Francesco Maria Raimondi:
  UML design and AWL programming for reconfigurable control software development of a robotic manipulator.
  
• Dan Hong Zhang, Jing-Bing Zhang, Yi Zhi Zhao, Ming Mao Wong:
  Event-based communications for equipment supervisory control.
  
• Yi Zhi Zhao, Jing-Bing Zhang, Liqun Zhuang, Dan Hong Zhang:
  Service-oriented architecture and technologies for automating integration of manufacturing systems and services.
  
• S. Apolloni, M. M. Savino, V. Scocca:
  An approach to define quality pointers for a quality management system in ISO9000 environment.
  
• Angelo Furfaro, Libero Nigro:
  Model checking hierarchical communicating real-time state machines.
  
• Fabiano Costa Carvalho, Ingrid Jansch-Pôrto, Edison Pignaton de Freitas, Carlos Eduardo Pereira:
  The TinyCAN: an optimized CAN controller IP for FPGA-based platforms.
  
• M. J. B. Calha, J. A. G. Fonseca:
  Data streams - an analysis of the interactions between real-time tasks.
  
• J. O. Coronel, Francisco Blanes, Gines Benet, José E. Simó, Pascual Pérez, Miguel Albero Gil:
  CAN-based distributed control architecture using the SCoCAN communication protocol.
  
• S. A. Manesis, P. M. Michael:
  Fuzzy supervisory control of air flow and temperature in industrial tunnel furnaces.
  
• Matthew C. Trigg, H. Dehbonei, C. V. Nayar:
  Digital sinusoidal PWM generation using a low-cost micro-controller based single-phase inverter.
  
• Tullio Facchinetti, Giorgio C. Buttazzo, Luís Almeida:
  A flexible visual simulator for wireless ad-hoc networks of mobile nodes.
  
• Fu-Shin Lee, Po-Jia Chen, Shao-Chin Tseng:
  Prototyping of a rotary/linear ultrasonic motor.
  
• R. S. Marques, Nicolas Navet, Françoise Simonot-Lion:
  Configuration of in-vehicle embedded systems under real-time constraints.
  
• J. A. Carvalho, A. S. Carvalho, Paulo Portugal:
  Assessment of PROFIBUS networks using a fault injection framework.
  
• Francisco Borges Carreiro, Ricardo Moraes, José Alberto Fonseca, Francisco Vasques:
  Real-time communication in unconstrained shared Ethernet networks: the virtual token-passing approach.
  
• J. Silvestre, V. Sempere, T. Albero:
  Impact of the use of large frame sizes in fieldbuses for multimedia applications.
  
• Patrick Loschmidt, Georg Gaderer, Thilo Sauter:
  A software platform architecture for multi-protocol, hardware supported clock synchronization in heterogeneous networks.
  
• Jan Kiszka, Bernardo Wagner:
  RTnet - a flexible hard real-time networking framework.
  
• Connor Upton, Gavin Doherty:
  Designing usable decision support systems for HVM.
  
• Alexandre Dolgui, I. Ihnatsenka:
  Machining lines with multi-spindle workstations: a new optimization problem.
  
• Mariagrazia Dotoli, Maria Pia Fanti, Agostino Marcello Mangini, G. Tempone:
  Fuzzy multi-objective optimization for network design of logistic and production systems.
  
• David Servat, Fabien Chiron, Khalid Kouiss, Thomas Meurisse, Guy Souchet:
  CLIPS: experiments on model-driven engineering for production systems.
  
• Jörn Peschke, Arndt Lüder, Hermann Kühnle:
  The PABADIS'PROMISE architecture - a new approach for flexible manufacturing systems.
  
• John V. Gialelis, Athanasios P. Kalogeras, A. Kaklis, Stavros A. Koubias:
  RosettaNet-based implementation for a collaborative continuous replenishment planning model utilizing Web services and ontologies.
  
• Juan J. Gude, Evaristo Kahoraho, J. Hernandez, Josu Etxaniz:
  Automation and control issues applied to a heat exchanger prototype.
  
• Enrico S. Canuto, Fabio Musso, Luca Massotti:
  Automation and control of Fabry-Perot interferometers.
  
• J. M. Escano, Manuel G. Ortega, Francisco R. Rubio:
  Position control of a pneumatic levitation system.
  
• W. Amer, Q. Ahsan, Roger I. Grosvenor, Paul W. Prickett:
  Machine tool condition monitoring system using tooth rotation energy estimation (TREE) technique.
  
• K. M. Al-Zahrani, M. Shafiq:
  Adaptive inverse control with IMC structure implementation on robotic arm manipulator.
  
• Fotis N. Koumboulis, George E. Panagiotakis:
  Exact model matching and disturbance rejection for general linear time delay systems via measurement output feedback.
  
• Paolo Lino, Bruno Maione, Alessandro Rizzo:
  A control-oriented model of a Common Rail injection system for diesel engines.
  
• Guido Maione:
  Combining loop-shaping and Laguerre development for rational approximation of a noninteger order, integral, analog controller.
  
• Paolo Arena, Luigi Fortuna, Mattia Frasca, G. L. Turco, Luca Patané, R. Russo:
  A new simulation tool for action-oriented perception systems.
  
• A. Fernandez, L. Gonzalez, I. Bediaga, A. Gaston, J. Hernandez:
  Automatic fault detection and diagnosis implementation based on intelligent approaches.
  
• Carlos Bernal Ruiz, F. E. Garcia-Tapias, Bonifacio Martín-del-Brío, Antonio Bono-Nuez, Nicolás J. Medrano-Marqués:
  Microcontroller implementation of a voice command recognition system for human-machine interface in embedded systems.
  
• José Luis López Cuadrado, Israel Gonzalez-Carrasco, Ángel García-Crespo, H. Ruiz-Mezcua, Y. Fernandez-Heijnen, J. L. Cantero-Guisandez:
  Applying an expert system to factory budget calculations.
  
• O. Lopez, Jose L. Martinez Lastra:
  Service-based methodology for controlling reconfigurable mechatronic devices.
  
• Uwe Schmidtmann, Gerd von Cölln, Gerhard Kreutz, Bodo Wenker, Rainer Koers:
  Incremental development of production units using HW/SW-encapsulation and simulation supported by a complete toolset.
  
• François Jammes, Harm Smit, Jose L. Martinez Lastra, Ivan M. Delamer:
  Orchestration of service-oriented manufacturing processes.
  
• Antoneta I. Bratcu, Alexandre Dolgui, Sana Belmokhtar:
  Reconfigurable transfer lines cost optimization - a linear programming approach.
  
• Paulo Leitão, Armando W. Colombo:
  An approach towards the development life-cycle of agent-based production control applications.
  
• Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury:
  On-line control reconfiguration at the machine and cell levels: case studies from the reconfigurable factory testbed.
  
• Jean-Pierre Thomesse:
  Fieldbus Technology and Industrial Automation. 651-653
  
• Christian Peter, Helmut Beikirch, Eric Ebert, Matthias Voss:
  Wireless sensor network for "intelligent" acquisition and processing of physiological information.
  
• Martino Fornasa, Massimo Maresca, Nicola Zingirian, L. Ballardin, S. Bedin:
  Development of a service-oriented architecture for the dynamic integration of mobile remote software components.
  
• Jean-Luc Scharbarg, Marc Boyer, Jérôme Ermont, Christian Fraboul:
  TTCAN over mixed CAN/switched Ethernet architecture.
  
• Jörg Kaiser, Hubert Piontek:
  Self-describing devices in COSMIC.
  
• Alfred C. Weaver:
  A security architecture for data privacy and security.
  
• Thomas Nolte, Guillermo Rodríguez-Navas, Julian Proenza, Sasikumar Punnekkat, Hans Hansson:
  Towards analyzing the fault-tolerant operation of server-CAN.
  
• Mario Barbera, Salvatore Incardona, Giovanni Schembra:
  Energy evolution of wireless sensor networks: an analytical approach.
  
• Marco Ortolani, Luca Gatani, Giuseppe Lo Re, Alfonso Urso, Salvatore Gaglio:
  An efficient retransmission strategy for data gathering in wireless sensor networks.
  
• Massimo Bergamasco, S. Perotti, Carlo Alberto Avizzano, Marcello Angerilli, Marcello Carrozzino, Emanuele Ruffaldi:
  Fork-lift truck simulator for training in industrial environment.
  
• G. Christine, G. Emilie:
  Modelling of distributed system in one single simulation model: a way to study communications within distributed systems.
  
• T. Kangilaski:
  Virtual organization and supply chain management.
  
• Sotiris Makris, Dimitris Mourtzis, Nikolaos Papakostas, George Chryssolouris:
  e-collaboration for ship repair supply chain management.
  
• Pedro Santana, José Barata, H. Cruz, A. Mestre, J. Lisboa, Luís Flores:
  A multi-robot system for landmine detection.
  
• Pedro Santana, José Barata:
  Unmanned helicopters applied to humanitarian demining.
  
• Daniele Caltabiano, Giovanni Muscato, Angelo Orlando, Cinzia Federico, Gaetano Giudice, Sergio Guerrieri:
  Architecture of a UAV for volcanic gas sampling.
  
• Wilfried Elmenreich, Stefan Krywult:
  A comparison of fieldbus protocols: LIN 1.3, LIN 2.0, and TTP/A.
  
• Cédric Wilwert, Françoise Simonot-Lion, Yeqiong Song, Françoise Simonot:
  Quantitative evaluation of the safety of X-by-Wire architecture subject to EMI perturbations.
  
• Eric Armengaud, Andreas Steininger, Martin Horauer:
  Efficient stimulus generation for testing embedded distributed systems the FlexRay example.
  
• Daniel Boto-Giralda, Miriam Antón-Rodríguez, Francisco Javier Díaz Pernas, José Fernando Díez Higuera, David González Ortega, Mario Martínez-Zarzuela:
  Intelligent system for dynamic transport fleet management.
  
• A. Bruno, Salvatore Rinaudo, S. F. Liotta, Eva Sciacca:
  High-level factory environment for process simulation: an open architecture.
  
• Thomas Werner, Claus Vetter:
  Data integrity in electric utility IT systems: a case study.
  
• J. Silvestre, R. Perez, J. Munoz:
  Systems integration of a mixed fibre detection process in raw yarn packages by computer vision.
  
• Gianluca Cena, Ivan Cibrario Bertolotti, Adriano Valenzano:
  Modelling CANopen communications according to the socket paradigm.
  
• Stefan Pitzek, Wilfried Elmenreich:
  Plug-and-play: bridging the semantic gap between application and transducers.
  
• M. Mock, S. Couturier:
  Middleware - integration of small devices.
  
• Jürgen Jasperneite, J. Feld:
  PROFINET: an integration platform for heterogeneous industrial communication systems.
  
• Marcus Tangermann, Christian Schwab, Arndt Lüder:
  Aspect orientation and object orientation of control application code for distributed control systems in TORERO.
  
• T. Albero, V. Sempere, J. Silvestre, P. Dabbas:
  Environmental control system based on mobile devices.
  
• Carlos Eduardo Pereira, H. A. Ataide, G. O. Kunz, Edison Pignaton de Freitas, Elias Teodoro Silva Jr., Fabiano Costa Carvalho:
  Performance evaluation of Java architectures in embedded real-time systems.
  
• Angelo Corsaro, Corrado Santoro:
  The analysis and evaluation of design patterns for distributed real-time Java software.
  
• Rui Pais, S. P. Barros, Luís Gomes:
  A tool for tailored code generation from Petri net models.
  
• Simeon Veloudis, Nimal Nissanke:
  An approach to modelling and analysis of coordinated atomic actions.
  
• Fauze Valério Polpeta, Antônio Augusto Fröhlich:
  On the automatic generation of SoC-based embedded systems.
  
• Benoit Miramond, Jean-Marc Delosme:
  Decision guide environment for design space exploration.
  
• K. Alexopoulos, A. Mamassioulas, Dimitris Mourtzis, George Chryssolouris:
  Volume and product flexibility: a case study for a refrigerators producing facility.
  
• C. Lalas, Dimitris Mourtzis, Nikolaos Papakostas, George Chryssolouris:
  A combinatory approach to order release and shop scheduling in discrete manufacturing environments.
  
• Fabrício Junqueira, Emília Villani, Paulo Eigi Miyagi:
  A platform for distributed modeling and simulation of productive systems based on Petri nets and object-oriented paradigm.
  
• Manos J. Georgoudakis, Athanasios P. Kalogeras, Christos E. Alexakos, Konstantinos J. Charatsis, Stavros A. Koubias:
  A holonic ontology-based multi-agent system for the distributed scheduling and monitoring of industrial processes.
  
• C. Genua, S. Giuffrida, Salvatore Rinaudo:
  "Gantt charts for production flow": a performance analysis framework for shop floor control effectiveness evaluation and monitoring.
  
• Adamo Castelnuovo, Luca Ferrarini:
  Petri net models of agent-based control of a FMS with randomly generated recipes.
  
• F. Jurado, M. Valverde:
  Inverter for microturbines based on multiobjective genetic algorithm.
  
• Soizick Calvez, Pascal Aygalinc, Patrice Bonhomme:
  Proactive/reactive approach for maintenance tasks in time critical systems.
  
• M. Shafiq, N. R. Butt:
  U-model based adaptive IMC for nonlinear dynamic plants.
  
• Luis Rubio, Manuel de la Sen, Asier Ibeas:
  An expert mill cutter selection system.
  
• Ramez M. Daoud, Hassanein H. Amer, Hany M. Elsayed:
  Fault tolerant two-level pyramid networked control systems.
  
• Fotis N. Koumboulis:
  On the heuristic design of common PI controllers for multi-model plants.
  
• Thomas Nolte, Hans Hansson, Lucia Lo Bello:
  Automotive communications-past, current and future.
  
• S. Cavalieri:
  Outdoor location detection based on signal propagation models.
  
• Christos D. Antonopoulos, Spilios Giannoulis, Stavros A. Koubias, I. Lymperopoulos:
  The effect of power consumption on the real time performance of routing protocols for ad hoc wireless networks.
  
• Giancarlo Iannizzotto, Carlo Costanzo, Pietro Lanzafame, Francesco La Rosa:
  A vision-based user interface for real-time controlling toy cars.
  
• Spilios Giannoulis, Christos D. Antonopoulos, Evangelos Topalis, Stavros A. Koubias:
  ZRP versus DSR and TORA: a comprehensive survey on ZRP performance.
  
• Thomas Fritz, M. Segura, Mario Südholt, Egon Wuchner, Jean-Marc Menaud:
  Automating adaptive image generation for medical devices using aspect-oriented programming.
  
• Luigi Fortuna:
  Waves and locomotion control of bio-inspired robots.
  
• Manuel G. Gericota, Gustavo R. Alves, José M. Ferreira:
  A self-healing real-time system based on run-time self-reconfiguration.
  
• Q. Ahsan, W. Amer, Roger I. Grosvenor, Paul W. Prickett:
  A compact monitoring system for process valves.
  
• A. Haglund, A. Larsson, P. Jedrasik, J. Gustavsson:
  Sub-wavelength surface grating application for high-power fundamental-mode and polarization stabilization of the VCSELs.
  
• Munir Merdan, Ivanka Terzic, Alois Zoitl, Bernard Favre-Bulle:
  Intelligent reconfiguration using knowledge based agent system.
  
• Luís Brito Palma, Fernando Vieira Coito, R. N. da Silva:
  Process fault diagnosis approach based on neural observers.
  
• Georg Neugschwandtner, Wolfgang Kastner, Martin Kögler:
  Programming fieldbus nodes: a RAD approach to customizable applications.
  
• Jürgen Greifeneder, Georg Frey:
  Probabilistic delay time analysis in networked automation systems.
  
• P. M. Fonte, J. C. Quadrado:
  ANN approach to WECS power forecast.
  
• Akihiro Koretsune, Shingo Aoki, Takefumi Konzo, Hiroshi Tsuji, S. Shimano, Eiji Mimura:
  DEA-based data mining for energy consumption.
  
• Seong-Ho Song:
  Thermal data correction algorithm for electrical components using infrared camera.
  
• Ana Antunes, P. Pedreiras, Alexandre Manuel Mota:
  Adapting the sampling period of a real-time adaptive distributed controller to the bus load.
  
• F. R. de la Rocha, R. S. de Oliveira:
  A real-time task model based on ideal instant.
  
• Andrea Bottino, Aldo Laurentini:
  A practical iterative algorithm for sensor positioning.
  
• Masayuki Nakano, Ryosuke Saga, Hiroshi Tsuji:
  Hotel room allocation for sales channel by dynamic programming.
  
• Masanori Akiyoshi, M. Matsumoto, Hironori Oka, Norihisa Komoda:
  Negotiation protocol for bilateral semi-competitive trading environments.
  
• Masaki Samejima, Shingo Tamura, Yoshitomo Ikkai, Norihisa Komoda:
  A scheduling method in multi-item production adjusting to urgent orders based on job modifiability.
  
• Koshichiro Mitsukuni, Yuichi Nakamura, Tomoyuki Aoki:
  Total SCM innovation for business globalization based on coupling point inventory planning.
  

Last update Wed May 22 03:46:59 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page