Computer-Aided Design, Volume 26

Volume 26, Number 1, January 1994

• Les A. Piegl:
  Editorial. 3-5
  
• Tony C. Woo:
  Visibility maps and spherical algorithms. 6-16
  
• Les A. Piegl, Wayne Tiller:
  Software-engineering approach to degree elevation of B-spline curves. 17-28
  
• Waguih H. ElMaraghy, Sree Ram Valluri, Bianka M. Skubnik, Patrick D. Surry:
  Intersection volumes and surface areas of cylinders for geometrical modelling and tolerancing. 29-45
  
• Moshe Shpitalni, Anath Fischer:
  Separation of disconnected machining regions on the basis of a CSG model. 46-58
  
• C. L. Philip Chen, Steven R. LeClair:
  Integration of design and manufacturing: solving setup generation and feature sequencing using an unsupervised-learning approach. 59-75
  
• 3rd European conference on rapid prototype & manufacturing 6th-7th July 1994. 78
  

Volume 26, Number 2, February 1994

• Kenneth Preiss:
  Agile manufacturing. 83-84
  
• Rajneet Sodhi, Joshua U. Turner:
  Towards modelling of assemblies for product design. 85-97
  
• Paula L. Beaty, Patrick A. Fitzhorn, Gary J. Herron:
  Extensions in variational geometry that generate and modify object edges composed of rational Bézier curves. 98-108
  
• Kamal P. Shah, S. A. Meguid, Athanasios Zougas:
  Development of software for integrated dynamic analysis of multibody systems. 109-118
  
• André Dolenc, Ismo Mäkelä:
  Slicing procedures for layered manufacturing techniques. 119-126
  
• George Samaras, David L. Spooner, Martin Hardwick:
  Query classification in object-oriented engineering design systems. 127-136
  
• Guido Brunnett, Johannes Kiefer:
  Interpolation with minimal-energy splines. 137-144
  
• Fenqiang Lin, William T. Hewitt:
  Expressing Coons-Gordon surfaces as NURBS. 145-155
  
• CSG 94: Set-theoretic solid modelling: Techniques and applications, Winchester, UK, April 1994. 156
  
• H. Hagen:
  Advanced animation and rendering techniques : A Watt Addison-Wesley, UK (1992) 840 pp, ISBN 0 201 544 121. 157
  
• L. W. W. Laing:
  An introduction to 3D autoCAD : A Yarwood Longman, UK (1993), 180 pp, ISBN 0 582 20991 9. 157-158
  

Volume 26, Number 3, March 1994

• B. K. Choi:
  Special issue: NC machining and cutter-path generation. 163
  
• Susan X. Li, Robert B. Jerard:
  5-axis machining of sculptured surfaces with a flat-end cutter. 165-178
  
• B. H. Kim, C. N. Chu:
  Effect of cutter mark on surface roughness and scallop height in sculptured surface machining. 179-188
  
• Martin Held, Gábor Lukács, László Andor:
  Pocket machining based on contour-parallel tool paths generated by means of proximity maps. 189-203
  
• S. Marshall, John G. Griffiths:
  A new cutter-path topology for milling machines. 204-214
  
• Jordan J. Cox, Yasuko Takezaki, Helaman R. P. Ferguson, Kent E. Kohkonen, Eric L. Mulkay:
  Space-filling curves in tool-path applications. 215-224
  
• Daniel C. H. Yang, Tom Kong:
  Parametric interpolator versus linear interpolator for precision CNC machining. 225-234
  
• B. K. Choi, Y. C. Chung, J. W. Park, D. H. Kim:
  Unified CAM-system architecture for die and mould manufacturing. 235-243
  
• Motoo Kondo:
  Decomposition of complex geometry for a manufacturing application. 244-252
  

Volume 26, Number 4, April 1994

• Deba Dutta:
  Special issue: Mathematical methods for CAD. 258
  
• Qijin Liu, T. C. Sun:
  G₁ interpolation of mesh curves. 259-267
  
• Klaus-Peter Beier, Yifan Chen:
  Highlight-line algorithm for realtime surface-quality assessment. 268-277
  
• Masaki Aono, David E. Breen, Michael J. Wozny:
  Fitting a woven-cloth model to a curved surface: mapping algorithms. 278-292
  
• Irene Gargantini, Günther F. Schrack, Aron Kwok:
  Reconstructing multishell solids from voxel-based contours. 293-301
  
• Mehran Chirehdast, Panos Y. Papalambros:
  Conversion of spatial-enumeration scheme into constructive solid geometry. 302-314
  
• Denis Blackmore, Ming C. Leu, Frank Yeong-Chyang Shih:
  Analysis and modelling of deformed swept volumes. 315-326
  
• Y. L. Srinivas, Debasish Dutta:
  Intuitive procedure for constructing geometrically complex objects using cyclides. 327-335
  

Volume 26, Number 5, May 1994

• Charles M. Eastman:
  Out of STEP? 338-340
  
• Janos Vida, Ralph R. Martin, Tamás Várady:
  A survey of blending methods that use parametric surfaces. 341-365
  
• Rajneet Sodhi, Joshua U. Turner:
  Relative positioning of variational part models for design analysis. 366-378
  
• Edwin Boender, Willem F. Bronsvoort, Frits H. Post:
  Finite-element mesh generation from constructive-solid-geometry models. 379-392
  
• Barry Joe, Wenping Wang, Fuhua Cheng:
  Reduced-knot NURBS representations of rational G1 composite Bézier curves. 393-399
  
• M. G. Leesley:
  CAD/CAM: Features, application and management : P J Jones Macmillan, UK (1992), 340 pp, ISBN 0 333 48532 7. 400
  

Volume 26, Number 6, June 1994

• Joshua Turner, Jarek Rossignac:
  Special Issue: Solid Modeling '93. 402
  
• Mohand Ourabah Benouamer, Dominique Michelucci, Bernard Peroche:
  Error-free boundary evaluation based on a lazy rational arithmetic: a detailed implementation. 403-416
  
• Marco Mazzetti, Luigi Ciminiera:
  Computing CSG-tree boundaries as algebraic expressions. 417-425
  
• Yacov Hel-Or, Ari Rappoport, Michael Werman:
  Relaxed parametric design with probabilistic constraints. 426-434
  
• Jin-Kang Gui, Martti Mäntylä:
  Functional understanding of assembly modelling. 435-451
  
• William J. Bouma, George Vanek Jr.:
  Modelling contacts in a physically based simulation. 452-464
  
• Louis Rivest, Clement Fortin, Claude Morel:
  Tolerancing a solid model with a kinematic formulation. 465-476
  
• Douglas L. Waco, Yong Se Kim:
  Geometric reasoning for machining features using convex decomposition. 477-489
  
• Gershon Elber, Elaine Cohen:
  Toolpath generation for freeform surface models. 490-496
  

Volume 26, Number 7, July 1994

• Graham E. M. Jared, Ken G. Swift:
  Special section: Tools for product introduction. 498
  
• Leonard D. Albano, Nam P. Suh:
  Axiomatic design and concurrent engineering. 499-504
  
• Geoffrey Boothroyd:
  Product design for manufacture and assembly. 505-520
  
• Frank G. Mill, Jane C. Naish, Jonathan C. Salmon:
  Design for machining with a simultaneous-engineering workstation. 521-527
  
• Graham E. M. Jared, Mark G. Limage, Ian J. Sherrin, Ken G. Swift:
  Geometric reasoning and design for manufacture. 528-536
  
• Shuo-Yan Chou, Tony C. Woo, Lin-Lin Chen, Kai Tang, Sung Yong Shin:
  Scallop hull and its offset. 537-542
  
• Ian Stroud:
  Boundary modelling with special representations. 543-550
  
• Charles M. Eastman, Nirva Fereshetian:
  Information models for use in product design: a comparison. 551-572
  
• Cecil G. Armstrong:
  Modelling requirements for finite-element analysis. 573-578
  
• Helmut Ratschek, Jon G. Rokne:
  Box-sphere intersection tests. 579-584
  
• Ching-Kuang Shene:
  Test for intersection between a plane and a connected compact polyhedron. 585-588
  

Volume 26, Number 8, August 1994

• Bianca Falcidieno:
  Special issue: Modelling in computer graphics. 595
  
• Shigeru Kuriyama:
  Surface modelling with an irregular network of curves via sweeping and blending. 597-606
  
• Francis Lazarus, Sabine Coquillart, Pierre Jancène:
  Axial deformations: an intuitive deformation technique. 607-613
  
• Lluis Solano, Pere Brunet:
  Constructive constraint-based model for parametric CAD systems. 614-621
  
• Shigeo Takahashi, Tosiyasu L. Kunii:
  Manifold-based multiple-viewpoint CAD: a case study of mountain guide-map generation. 622-631
  
• Xin Chen, Francis Schmitt:
  Surface modelling of range data by constrained triangulation. 632-645
  
• Teresa De Martino, Bianca Falcidieno, Franca Giannini, Stefan Haßinger, Jivka Ovtcharova:
  Feature-based modelling by integrating design and recognition approaches. 646-653
  

Volume 26, Number 9, September 1994

• James H. Oliver, H.-Ted Huang:
  Automated path planning for integrated assembly design. 658-666
  
• Yuan-Jye Tseng, Sanjay B. Joshi:
  Recognizing multiple interpretations of interacting machining features. 667-688
  
• Avner Schwarz, Daniel M. Berry, Edna Shaviv:
  Representing and solving the automated building design problem. 689-698
  
• Qing-Wen Yan, C. L. Philip Chen, Zesheng Tang:
  Efficient algorithm for the reconstruction of 3D objects from orthographic projections. 699-717
  
• Joris S. M. Vergeest:
  STEP: An introduction : J. Owen Information Geometers, UK (1993), 145 pp, ISBN 1 87472804 6. 719-720
  

Volume 26, Number 10, October 1994

• John Zucker, Adrian Demaid:
  Object-oriented representation of qualitative engineering properties. 722-734
  
• Suresh K. Lodha, Joe D. Warren:
  Degree reduction of Bézier simplexes. 735-746
  
• Avner Schwarz, Daniel M. Berry, Edna Shaviv:
  On the use of the automated building design system. 747-762
  
• Jonathan Cagan:
  Shape annealing solution to the constrained geometric knapsack problem. 763-770
  
• David H. Lentz, Robert Sowerby:
  Hole extraction for sheet metal components. 771-783
  
• Alan Ball:
  Fundamental developments of computer-aided geometric modeling: L. Piegl (Ed.) Academic Press, USA (1993), 414 pp, ISBN 0 12 554765 X. 784
  

Volume 26, Number 11, November 1994

• B. K. Choi:
  Special issue: NC machining and cutter-path generation. 786
  
• Hui Li, Zuomin Dong, Geoffrey W. Vickers:
  Optimal toolpath pattern identification for single island, sculptured part rough machining using fuzzy pattern analysis. 787-795
  
• Gershon Elber:
  Accessibility in 5-axis milling environment. 796-802
  
• Malcolm C. Fields, David C. Anderson:
  Fast feature extraction for machining applications. 803-813
  
• Heedong Ko, Moon-Sang Kim, Hyun-Goo Park, Seung-Woo Kim:
  Face sculpturing robot with recognition capability. 814-821
  
• Kunwoo Lee, Tae Ju Kim, Sung Eui Hong:
  Generation of toolpath with selection of proper tools for rough cutting process. 822-831
  
• Moshe Shpitalni, Y. Koren, C. C. Lo:
  Realtime curve interpolators. 832-838
  
• John G. Griffiths:
  Toolpath based on Hilbert's curve. 839-844
  
• Millan K. Yeung, Desmond J. Walton:
  Curve fitting with arc splines for NC toolpath generation. 845-849
  
• Dimitris Kiritsis:
  High precision interpolation algorithm for 3D parametric curve generation. 850-856
  

Volume 26, Number 12, December 1994

• Bülent Özgüç:
  Special issue: Advances in animation, rendering and visualization. 859
  
• Xinmin Zhao, Norman I. Badler:
  Interactive body awareness. 861-867
  
• Ugur Güdükbay, Bülent Özgüç:
  Animation of deformable models. 868-875
  
• Kadi Bouatouch, Thierry Priol:
  Data management scheme for parallel radiosity. 876-882
  
• Cevdet Aykanat, Veysi Isler, Bülent Özgüç:
  Efficient parallel spatial subdivision algorithm for object-based parallel ray tracing. 883-890
  
• Pascal Guitton, Christophe Schlick:
  RRIFF: a proposal for the interchange of realistic scene descriptions. 891-898
  
• Hendrik A. Goosen, Anna R. Karlin, David R. Cheriton, Dieter Polzin:
  Chiron parallel program performance visualization system. 899-906
  
• Rosa Maria Spitaleri:
  Visual numerical environment: reference models, methods and tools. 907-916
  
• Derek J. Paddon, Alan Chalmers:
  Parallel processing of the radiosity method. 917-927
  
• Scott Whitman:
  Survey of parallel approaches to scientific visualization. 928-935
  

Last update Wed May 22 17:05:52 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page