Stop the war!Остановите войну!
for scientists:
default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDComputers & Chemical Engineering, Volume 35
Volume 35, Number 1, January 2011
- Rafiqul Gani
:
Editorial announcement. iii - Petr Kadlec, Ratko Grbic, Bogdan Gabrys:
Review of adaptation mechanisms for data-driven soft sensors. 1-24 - Ade Haryanto, Keum-Shik Hong:
Modeling and simulation of an oxy-fuel combustion boiler system with flue gas recirculation. 25-40 - Katja Lappalainen, Elena Gorshkova, Mikko Manninen, Ville Alopaeus:
Characteristics of liquid and tracer dispersion in trickle-bed reactors: Effect on CFD modeling and experimental analyses. 41-49 - Wolfram Heineken, Dietrich Flockerzi, Andreas Voigt, Kai Sundmacher:
Dimension reduction of bivariate population balances using the quadrature method of moments. 50-62 - Aidong Yang, Elaine B. Martin, A. Julian Morris:
Identification of semi-parametric hybrid process models. 63-70 - Peter Kühl, Moritz Diehl, Tom Kraus, Johannes P. Schlöder, Hans Georg Bock:
A real-time algorithm for moving horizon state and parameter estimation. 71-83 - Míriam R. García, Carlos Vilas, Eva Balsa-Canto, Velislava N. Lyubenova, Maya N. Ignatova, Antonio A. Alonso:
On-line estimation in a distributed parameter bioreactor: Application to the gluconic acid production. 84-91 - Iskandar Halim, Rajagopalan Srinivasan:
A knowledge-based simulation-optimization framework and system for sustainable process operations. 92-105 - Jorge E. Alaña, Constantinos Theodoropoulos:
Optimal location of measurements for parameter estimation of distributed parameter systems. 106-120 - Ritesh Krishna, Satyadarshi Nanda, Abhijit Kulkarni, Sangameshwar Patil:
A partial Granger causality based method for analysis of parameter interactions in bioreactors. 121-126 - A. J. Willis:
Design of a modified sequential probability ratio test (SPRT) for pipeline leak detection. 127-131 - Xi Zhang, Karlene A. Hoo:
Effective fault detection and isolation using bond graph-based domain decomposition. 132-148 - Gabriela Corsano, Jorge M. Montagna:
Mathematical modeling for simultaneous design of plants and supply chain in the batch process industry. 149-164 - S. A. MirHassani, H. Fani Jahromi:
Scheduling multi-product tree-structure pipelines. 165-176 - Gheorghe Maria, Anca Dan:
Derivation of optimal operating policies under safety and technological constraints for the acetoacetylation of pyrrole in a semi-batch catalytic reactor. 177-189
Volume 35, Number 2, February 2011
- I. I. Ruiz-López, H. Ruiz-Espinosa, M. L. Luna-Guevara, Miguel Ángel García-Alvarado:
Modeling and simulation of heat and mass transfer during drying of solids with hemispherical shell geometry. 191-199 - Gabriela Salejova, Zdenek Grof, Olga Solcova, Petr Schneider, Juraj Kosek:
Strategy for predicting effective transport properties of complex porous structures. 200-211 - Boleslaw Tabis, Robert Grzywacz:
Numerical and technological properties of bubble column bioreactors for aerobic processes. 212-219 - Mario E. Mellado, María P. Casanova, Luis A. Cisternas, Edelmira D. Gálvez:
On scalable analytical models for heap leaching. 220-225 - Elwira Tomczak:
Application of ANN and EA for description of metal ions sorption on chitosan foamed structure - Equilibrium and dynamics of packed column. 226-235 - Claudia Gutiérrez-Antonio, Abel Briones-Ramírez, Arturo Jiménez-Gutiérrez:
Optimization of Petlyuk sequences using a multi objective genetic algorithm with constraints. 236-244 - Alexey Zakharov, Sirkka-Liisa Jämsä Jounela:
Iterative optimization of the economic efficiency of an industrial process within the validity area of the static plant model and its application to a Pulp Mill. 245-254 - Steffen Rebennack, Josef Kallrath, Panos M. Pardalos:
Optimal storage design for a multi-product plant: A non-convex MINLP formulation. 255-271 - Jinhui Zhao, Ning Wang:
A bio-inspired algorithm based on membrane computing and its application to gasoline blending scheduling. 272-283 - Zhiqiang Ge, Zhihuan Song:
Process structure change detection by eigenvalue-based method. 284-295 - Ryan Gosselin, Denis Rodrigue, Carl Duchesne:
A hyperspectral imaging sensor for on-line quality control of extruded polymer composite products. 296-306 - Luis A. Ricardez-Sandoval, Peter L. Douglas, H. M. Budman:
A methodology for the simultaneous design and control of large-scale systems under process parameter uncertainty. 307-318 - M. Bin Shams, Hector M. Budman, Thomas A. Duever:
Finding a trade-off between observability and economics in the fault detection of chemical processes. 319-328 - Chuei-Tin Chang, Chung Yang Chen:
Fault diagnosis with automata generated languages. 329-341 - Kaushik Ghosh, Yew Seng Ng, Rajagopalan Srinivasan:
Evaluation of decision fusion strategies for effective collaboration among heterogeneous fault diagnostic methods. 342-355 - Li-Ping Chung, Chuei-Tin Chang:
Petri-net models for comprehensive hazard analysis of MOCVD processes. 356-371 - Pedro M. Castro, Iiro Harjunkoski, Ignacio E. Grossmann:
Optimal scheduling of continuous plants with energy constraints. 372-387 - Guido Buzzi Ferraris, Flavio Manenti:
Outlier detection in large data sets. 388-390
Volume 35, Number 3, March 2011
- Venkat Venkatasubramanian, Rafiqul Gani:
Computers & Chemical Engineering: Best paper of 2009. 391-392 - Michael Frenkel:
Thermophysical and thermochemical properties on-demand for chemical process and product design. 393-402 - Saeed Khaleghi Rahimian, Farhang Jalali, J. D. Seader, Ralph E. White:
A new homotopy for seeking all real roots of a nonlinear equation. 403-411 - Shamsul Qamar, Saima Noor, Mubeen Rehman, Andreas Seidel-Morgenstern:
Numerical solution of a multi-dimensional batch crystallization model with fines dissolution. 412-422 - Jonas Roininen, Ville Alopaeus:
The moment method for one-dimensional dynamic reactor models with axial dispersion. 423-433 - Zdzislaw Jaworski, Barbara Zakrzewska:
Towards multiscale modelling in product engineering. 434-445 - Débora C. Faria, Miguel J. Bagajewicz:
Novel bound contraction procedure for global optimization of bilinear MINLP problems with applications to water management problems. 446-455 - F. Esmaeilzadeh Azar, Michel Perrier, Balasubramaniam Srinivasan:
A global optimization method based on multi-unit extremum-seeking for scalar nonlinear systems. 456-463 - Giovanni Stracquadanio, Giuseppe Nicosia:
Computational energy-based redesign of robust proteins. 464-473 - Frances E. Pereira, E. Keskes, Amparo Galindo, George Jackson, Claire S. Adjiman:
Integrated solvent and process design using a SAFT-VR thermodynamic description: High-pressure separation of carbon dioxide and methane. 474-491 - Kaibiao Sun, Yuan Tian, Lansun Chen, Andrzej Kasperski:
Universal modelling and qualitative analysis of an impulsive bioprocess. 492-501 - Tao Chen, Kunn Hadinoto, Wenjin Yan, Yifei Ma:
Efficient meta-modelling of complex process simulations with time-space-dependent outputs. 502-509 - Efrén Aguilar-Garnica, Juan Paulo García-Sandoval, Carlos González-Figueredo:
A robust monitoring tool for distributed parameter plug flow reactors. 510-518 - Ruben Gonzalez, Biao Huang, Fangwei Xu, Aris Espejo, Joseph Amalraj, William Lam:
Reconciling continuum and non-continuum data with industrial application. 519-529 - Eduardo L. T. Conceição, António A. T. G. Portugal:
Finite-sample comparison of robust estimators for nonlinear regression using Monte Carlo simulation: Part I. Univariate response models. 530-544 - Vivek Dua:
An Artificial Neural Network approximation based decomposition approach for parameter estimation of system of ordinary differential equations. 545-553 - Ricardo M. Lima, Ignacio E. Grossmann, Yu Jiao:
Long-term scheduling of a single-unit multi-product continuous process to manufacture high performance glass. 554-574
Volume 35, Number 4, April 2011
- Yoshikazu Ishii, Fred D. Otto:
An alternate computational architecture for advanced process engineering. 575-594 - Z. F. Tian, P. J. Witt, William Yang, M. P. Schwarz:
Numerical simulation and validation of gas-particle rectangular jets in crossflow. 595-605 - Joanna Smula-Ostaszewska, Bernhard Peters:
Evaluation of potassium chloride emissions applying the Discrete Particle Method (DPM). 606-614 - Kezong Tang, Tingkai Sun, Jing-Yu Yang:
An improved genetic algorithm based on a novel selection strategy for nonlinear programming problems. 615-621 - Onur A. Kilic, Dirk Pieter van Donk, Jacob Wijngaard:
A discrete time formulation for batch processes with storage capacity and storage time limitations. 622-629 - Rayees Ahamed Imam, Hannsjörg Freund, Kai Sundmacher:
Dynamics of liquid-liquid systems based on linear thermodynamics of irreversible processes. 630-637 - Smaranda Cristea, César de Prada, Daniel Sarabia, Gloria Gutiérrez:
Aeration control of a wastewater treatment plant using hybrid NMPC. 638-650 - H. Prashanth Reddy, Shankar Narasimhan, S. Murty Bhallamudi, S. Bairagi:
Leak detection in gas pipeline networks using an efficient state estimator. Part-I: Theory and simulations. 651-661 - H. Prashanth Reddy, Shankar Narasimhan, S. Murty Bhallamudi, S. Bairagi:
Leak detection in gas pipeline networks using an efficient state estimator. Part II. Experimental and field evaluation. 662-670 - Yang Yang, Tian Lin, Xiao L. Weng, Jawwad A. Darr, Xue Z. Wang:
Data flow modeling, data mining and QSAR in high-throughput discovery of functional nanomaterials. 671-678
- Manfred Theißen, Ri Hai, Wolfgang Marquardt:
A framework for work process modeling in the chemical industries. 679-691 - Andreas Wiesner, Jan Morbach, Wolfgang Marquardt:
Information integration in chemical process engineering based on semantic technologies. 692-708 - Thomas Heer, René Wörzberger:
Support for modeling and monitoring of engineering design processes. 709-723 - Anne-Thérèse Körtgen, Manfred Nagl:
Tools for consistency management between design products. 724-735 - Thomas Haase, Manfred Nagl:
Application integration within an integrated design environment. 736-747
Volume 35, Number 5, May 2011
- Sauro Pierucci, Guido Buzzi Ferraris:
Preface. 749 - Weiguo Xie, Ioannis Bonis, Constantinos Theodoropoulos:
Off-line model reduction for on-line linear MPC of nonlinear large-scale distributed systems. 750-757 - O. Naeem, A. E. M. Huesman:
Non-linear model approximation and reduction by new input-state Hammerstein block structure. 758-773 - Edrisi Muñoz, Elisabet Capón-García, Marta Moreno-Benito, Antonio Espuña Camarasa, Luis Puigjaner:
Scheduling and control decision-making under an integrated information environment. 774-786 - Maren Urselmann, Sabine Barkmann, Guido Sand, Sebastian Engell:
Optimization-based design of reactive distillation columns using a memetic algorithm. 787-805 - Kris Villez, Babji Srinivasan, Raghunathan Rengaswamy, Shankar Narasimhan, Venkat Venkatasubramanian:
Kalman-based strategies for Fault Detection and Identification (FDI): Extensions and critical evaluation for a buffer tank system. 806-816 - Gregory Robertson, Ahmet Palazoglu, José A. Romagnoli:
A multi-level simulation approach for the crude oil loading/unloading scheduling problem. 817-827 - Noor Asma Fazli Abdul Samad, Ravendra Singh, Gürkan Sin, Krist V. Gernaey, Rafiqul Gani:
A generic multi-dimensional model-based system for batch cooling crystallization processes. 828-843 - Ali Mohammad Sahlodin, Benoît Chachuat:
Convex/concave relaxations of parametric ODEs using Taylor models. 844-857 - Songsong Liu, Flora Konstantopoulou, Petros Gikas, Lazaros G. Papageorgiou:
A mixed integer optimisation approach for integrated water resources management. 858-875 - Ruth Misener, Jeffrey P. Thompson, Christodoulos A. Floudas:
APOGEE: Global optimization of standard, generalized, and extended pooling problems via linear and logarithmic partitioning schemes. 876-892 - J. F. W. Adams, Michael Fairweather, J. Yao:
Modelling and simulation of particle re-suspension in a turbulent square duct flow. 893-900 - Giulia Bozzano, Mario Dente:
Modelling the drop coalescence at the interface of two liquids. 901-906 - Francesco Coletti, Sandro Macchietto, Graham T. Polley:
Effects of fouling on performance of retrofitted heat exchanger networks: A thermo-hydraulic based analysis. 907-917 - Eugenio Bringas, Rosa Mediavilla, Ana María Urtiaga, Inmaculada Ortiz:
Development and validation of a dynamic model for regeneration of passivating baths using membrane contactors. 918-927 - Sommariva Sommariva, Roberto Grana, Tiziano Maffe, Sauro Pierucci, Eliseo Ranzi:
A kinetic approach to the mathematical model of fixed bed gasifiers. 928-935 - Stella Bezergianni, Konstantinos Kalogeras, Petros A. Pilavachi:
On maximizing biodiesel mixing ratio based on final product specifications. 936-942 - Petar Sabev Varbanov, Jirí Jaromír Klemes, Ferenc Friedler:
Cell-based dynamic heat exchanger models - Direct determination of the cell number and size. 943-948 - Korbinian Kraemer, Andreas Harwardt, Rob Bronneberg, Wolfgang Marquardt:
Separation of butanol from acetone-butanol-ethanol fermentation by a hybrid extraction-distillation process. 949-963 - Vladimír Novák, Petr Kocí, Frantisek Stepánek, Milan Kubicek, Milos Marek:
Simulated preparation of supported porous catalyst and evaluation of its reaction-transport properties. 964-972 - R. S. Thakur, Nitin Kaistha, D. P. Rao:
Process intensification in duplex pressure swing adsorption. 973-983
Volume 35, Number 6, June 2011
- Jerzy Szczygiel:
Effect of the diffusion phenomena in the catalyst grain on the selectivity of a system of parallel-consecutive reactions involved in the process of n-heptane dehydrocyclization. 985-998 - Rajesh Kumar, Jitendra Kumar, Gerald Warnecke:
Numerical methods for solving two-dimensional aggregation population balance equations. 999-1009 - José A. Delgado, María A. Uguina, José L. Sotelo, Vicente I. Águeda, Abel Sanz, Pilar Gómez:
Numerical analysis of CO2 concentration and recovery from flue gas by a novel vacuum swing adsorption cycle. 1010-1019 - Edward Baudrez, Geraldine J. Heynderickx, Guy B. Marin:
Accuracy and convergence rate of steady-state simulation of one-dimensional, reactive gas flow with molar expansion. 1020-1037 - Sylvain Mouret, Ignacio E. Grossmann, Pierre Pestiaux:
Time representations and mathematical models for process scheduling problems. 1038-1063 - Hamed Safikhani, A. Hajiloo, M. A. Ranjbar:
Modeling and multi-objective optimization of cyclone separators using CFD and genetic algorithms. 1064-1071 - N. Felbab, Diane Hildebrandt, David Glasser:
A new method of locating all pinch points in nonideal distillation systems, and its application to pinch point loci and distillation boundaries. 1072-1087 - Pimporn Lek-utaiwan, Bunyaphat Suphanit, Peter L. Douglas, Nakarin Mongkolsiri:
Design of extractive distillation for the separation of close-boiling mixtures: Solvent selection and column optimization. 1088-1100 - Hangzhou Wang, Zhihong Yuan, Bingzhen Chen, Xiaorong He, Jinsong Zhao, Tong Qiu:
Analysis of the stability and controllability of chemical processes. 1101-1109 - Sridhar Ungarala:
A direct sampling particle filter from approximate conditional density function supported on constrained state space. 1110-1118 - DuyQuang Nguyen, Miguel J. Bagajewicz:
Parallel computing approaches to sensor network design using the value paradigm. 1119-1134 - Hiromasa Kaneko, Masamoto Arakawa, Kimito Funatsu:
Novel soft sensor method for detecting completion of transition in industrial polymer processes. 1135-1142 - Sridhar Maddipati, Ravi Nandigam, Sangtae Kim, Venkat Venkatasubramanian:
Learning patterns in combinatorial protein libraries by Support Vector Machines. 1143-1151 - Kwang Seok Kim, Laurent Simon:
Modeling and design of transdermal drug delivery patches containing an external heating device. 1152-1163 - A. Ajbar:
On the improvement of performance of bioreactors through periodic forcing. 1164-1170
Volume 35, Number 7, July 2011
- Anthony G. Dixon, M. Ertan Taskin, Michiel Nijemeisland, E. Hugh Stitt:
Systematic mesh development for 3D CFD simulation of fixed beds: Single sphere study. 1171-1185 - João C. Santos, Yiyu Cheng, Madalena M. Dias, Alírio E. Rodrigues:
Surface B-splines fitting for speeding up the simulation of adsorption processes with IAS model. 1186-1191 - S. N. P. Vegendla, Geraldine J. Heynderickx, Guy B. Marin:
Comparison of Eulerian-Lagrangian and Eulerian-Eulerian method for dilute gas-solid flow with side inlet. 1192-1199 - Prashant, J. J. Derksen:
Direct simulations of spherical particle motion in Bingham liquids. 1200-1214 - Guido Buzzi Ferraris:
New trends in building numerical programs. 1215-1225 - C. C. R. S. Rossi, Márcio Eduardo Berezuk, Lucio Cardozo-Filho, Reginaldo Guirardello:
Simultaneous calculation of chemical and phase equilibria using convexity analysis. 1226-1237 - Peter Bror Alfred Blomberg, Pertti Sakari Koukkari:
A systematic method to create reaction constraints for stoichiometric matrices. 1238-1250 - Jasper van Baten, Richard Szczepanski:
A thermodynamic equilibrium reactor model as a CAPE-OPEN unit operation. 1251-1256 - Lin Sun, Xionglin Luo:
Synthesis of multipass heat exchanger networks based on pinch technology. 1257-1264 - Léda Gerber, Martin Gassner, François Maréchal:
Systematic integration of LCA in process systems design: Application to combined fuel and electricity production from lignocellulosic biomass. 1265-1280 - Shi Li, Catherine Cadet, Pierre-Xavier Thivel, Françoise Delpech:
Towards the modelling and control of NOx emission in a fluidized bed sludge combustor. 1281-1294 - Natesan Subramanian Jayakumar, A. Agrawal, M. A. Hashim, Jaya N. Sahu:
Experimental and theoretical investigation of parametric sensitivity and dynamics of a continuous stirred tank reactor for acid catalyzed hydrolysis of acetic anhydride. 1295-1303 - David A. Johnson, Justin R. Spaeth, William C. Rose, Ulhas P. Naik, Antony N. Beris:
An impedance model for blood flow in the human arterial system. Part I: Model development and MATLAB implementation. 1304-1316 - Ankan Kumar, Sandip Mazumder:
Adaptation and application of the In Situ Adaptive Tabulation (ISAT) procedure to reacting flow calculations with complex surface chemistry. 1317-1327 - James A. Kimber, Sergei G. Kazarian, Frantisek Stepánek:
Microstructure-based mathematical modelling and spectroscopic imaging of tablet dissolution. 1328-1339
Volume 35, Number 8, August 2011
- Ignacio E. Grossmann, Jeffrey J. Siirola:
Preface. 1341-1342 - Iskandar Halim, Ana Carvalho, Rajagopalan Srinivasan, Henrique A. Matos, Rafiqul Gani:
A combined heuristic and indicator-based methodology for design of sustainable chemical process plants. 1343-1358 - Pei Liu, Alan Whitaker, Efstratios N. Pistikopoulos, Zheng Li:
A mixed-integer programming approach to strategic planning of chemical centres: A case study in the UK. 1359-1373 - Buping Bao, Denny Kok Sum Ng, Douglas H. S. Tay, Arturo Jiménez-Gutiérrez, Mahmoud M. El-Halwagi:
A shortcut method for the preliminary synthesis of process-technology pathways: An optimization approach and application for the conceptual design of integrated biorefineries. 1374-1383 - Gabriela Corsano, Aldo R. Vecchietti, Jorge M. Montagna:
Optimal design for sustainable bioethanol supply chain considering detailed plant performance model. 1384-1398 - Josephine A. Elia, Richard C. Baliban, Xin Xiao, Christodoulos A. Floudas:
Optimal energy supply network determination and life cycle analysis for hybrid coal, biomass, and natural gas to liquid (CBGTL) plants using carbon-based hydrogen production. 1399-1430 - Aviral Shukla, Joseph F. Pekny, Venkat Venkatasubramanian:
An optimization framework for cost effective design of refueling station infrastructure for alternative fuel vehicles. 1431-1438 - S. Ranjan, S. Balaji, Rocco A. Panella, B. Erik Ydstie:
Silicon solar cell production. 1439-1453 - Tânia Pinto-Varela, Ana Paula F. D. Barbosa-Póvoa, Augusto Q. Novais:
Bi-objective optimization approach to the design and planning of supply chains: Economic versus environmental performances. 1454-1468 - Gonzalo Guillén-Gosálbez:
A novel MILP-based objective reduction method for multi-objective optimization: Application to environmental problems. 1469-1477 - Pablo Martínez, Ana M. Eliceche:
Bi-objective minimization of environmental impact and cost in utility plants. 1478-1487 - John C. Eslick, David C. Miller:
A multi-objective analysis for the retrofit of a pulverized coal power plant with a CO2 capture and compression process. 1488-1500 - Mar Pérez-Fortes, Aarón David Bojarski, Luis Puigjaner:
Advanced simulation environment for clean power production in IGCC plants. 1501-1520 - Aroonsri Nuchitprasittichai, Selen Cremaschi:
Optimization of CO2 capture process with aqueous amines using response surface methodology. 1521-1531 - Jorge Francisco Mulia-Soto, Antonio Flores-Tlacuahuac:
Modeling, simulation and control of an internally heat integrated pressure-swing distillation process for bioethanol separation. 1532-1546 - Lidija Cucek, Mariano Martín, Ignacio E. Grossmann, Zdravko Kravanja:
Energy, water and process technologies integration for the simultaneous production of ethanol and food from the entire corn plant. 1547-1557 - Eusiel Rubio-Castro, José María Ponce-Ortega, Medardo Serna-González, Arturo Jiménez-Gutiérrez, Mahmoud M. El-Halwagi:
A global optimal formulation for the water integration in eco-industrial parks considering multiple pollutants. 1558-1574 - Iskandar Halim, Rajagopalan Srinivasan:
Sequential methodology for integrated optimization of energy and water use during batch process scheduling. 1575-1597 - Vanina Estrada, J. Di Maggio, María Soledad Díaz:
Water sustainability: A systems engineering approach to restoration of eutrophic Lakes. 1598-1613 - Zhixia Zhong, Fengqi You:
Oil spill response planning with consideration of physicochemical evolution of the oil slick: A multiobjective optimization approach. 1614-1630 - Yan Zhang, Panagiotis D. Vouzis, Nikolaos V. Sahinidis:
GPU simulations for risk assessment in CO2 geologic sequestration. 1631-1644
Volume 35, Number 9, September 2011
- Efstratios N. Pistikopoulos, Michael C. Georgiadis:
Preface. 1645-1646 - Richard C. Baliban, Josephine A. Elia, Christodoulos A. Floudas:
Optimization framework for the simultaneous process synthesis, heat and power integration of a thermochemical hybrid biomass, coal, and natural gas facility. 1647-1690 - Dimitrios Georgis, Sujit S. Jogwar, Ali S. Almansoori, Prodromos Daoutidis:
Design and control of energy integrated SOFC systems for in situ hydrogen production and power generation. 1691-1704 - Yidong Lang, Stephen E. Zitney, Lorenz T. Biegler:
Optimization of IGCC processes with reduced order CFD models. 1705-1717 - Jeonghwa Moon, Seon B. Kim, Andreas A. Linninger:
Integrated design and control under uncertainty: Embedded control optimization for plantwide processes. 1718-1724 - Bri-Mathias S. Hodge, Shisheng Huang, John D. Siirola, Joseph F. Pekny, Gintaras V. Reklaitis:
A multi-paradigm modeling framework for energy systems simulation and analysis. 1725-1737 - Jinkyung Kim, Matthew J. Realff, Jay H. Lee:
Optimal design and global sensitivity analysis of biomass supply chain networks for biofuels under uncertainty. 1738-1751 - Edwin Zondervan, Mehboob Nawaz, André B. de Haan, John M. Woodley, Rafiqul Gani:
Optimal design of a multi-product biorefinery system. 1752-1766 - Paritosh Sharma, Bhaba R. Sarker, José A. Romagnoli:
A decision support tool for strategic planning of sustainable biorefineries. 1767-1781 - Sara Giarola, Andrea Zamboni, Fabrizio Bezzo:
Spatially explicit multi-objective optimisation for design and planning of hybrid first and second generation biorefineries. 1782-1797 - Mariano Martín, Ignacio E. Grossmann:
Energy optimization of hydrogen production from lignocellulosic biomass. 1798-1806 - Eman A. Tora, Mahmoud M. El-Halwagi:
Integrated conceptual design of solar-assisted trigeneration systems. 1807-1814 - Petar Sabev Varbanov, Jirí Jaromír Klemes:
Integration and management of renewables into Total Sites with variable supply and demand. 1815-1826 - Rajab Khalilpour, I. A. Karimi:
Investment portfolios under uncertainty for utilizing natural gas resources. 1827-1837 - Taoufiq Gueddar, Vivek Dua:
Disaggregation-aggregation based model reduction for refinery-wide optimization. 1838-1856 - Zheng Li, Pei Liu, Fen He, Minghua Wang, Efstratios N. Pistikopoulos:
Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis. 1857-1862 - Juan M. Salazar, Urmila M. Diwekar, Stephen E. Zitney:
Rigorous-simulation pinch-technology refined approach for process synthesis of the water-gas shift reaction system in an IGCC process with carbon capture. 1863-1875 - Jingjie Xiao, Bri-Mathias S. Hodge, Joseph F. Pekny, Gintaras V. Reklaitis:
Operating reserve policies with high wind power penetration. 1876-1885 - Chrysovalantou Ziogou, Spyros Voutetakis, Simira Papadopoulou, Michael C. Georgiadis:
Modeling, simulation and experimental validation of a PEM fuel cell system. 1886-1900 - Jian Zhang, Qiang Xu:
Cascade refrigeration system synthesis based on exergy analysis. 1901-1914 - Margaritis Kostoglou, C. P. Lekkos, A. G. Konstandopoulos:
On mathematical modeling of solar hydrogen production in monolithic reactors. 1915-1922 - Eustathios S. Kikkinides:
Design and optimization of hydrogen storage units using advanced solid materials: General mathematical framework and recent developments. 1923-1936 - Ernesto Martínez-Rosas, Ruben Vasquez-Medrano, Antonio Flores-Tlacuahuac:
Modeling and simulation of lithium-ion batteries. 1937-1948
Volume 35, Number 10, October 2011
- Christophe Vandekerckhove, Benjamin Sonday, Alexei Makeev, Dirk Roose, Ioannis G. Kevrekidis:
A common approach to the computation of coarse-scale steady states and to consistent initialization on a slow manifold. 1949-1958 - Mirella Coroneo, Giuseppina Montante, Alessandro Paglianti, F. Magelli:
CFD prediction of fluid flow and mixing in stirred tanks: Numerical issues about the RANS simulations. 1959-1968 - Matt J. Baker, P. G. Young, G. R. Tabor:
Image based meshing of packed beds of cylinders at low aspect ratios using 3d MRI coupled with computational fluid dynamics. 1969-1977 - A. Vikhansky:
Numerical analysis of the global identifiability of reaction-diffusion systems. 1978-1982 - Shabina Khanam, B. Mohanty:
Development of a new model for multiple effect evaporator system. 1983-1993 - Kexin Wang, Zhijiang Shao, Lorenz T. Biegler, Yidong Lang, Jixin Qian:
Robust extensions for reduced-space barrier NLP algorithms. 1994-2004 - Li-Juan Li, Rui-Jie Zhou, Hong-Guang Dong, Ignacio E. Grossmann:
Separation network design with mass and energy separating agents. 2005-2016 - Xingxing Zhang, Kejin Huang, Haisheng Chen, Shaofeng Wang:
Comparing three configurations of the externally heat-integrated double distillation columns (EHIDDiCs). 2017-2033 - Worapon Kiatkittipong, Parinya Intaracharoen, Navadol Laosiripojana, Choowong Chaisuk, Piyasan Praserthdam, Suttichai Assabumrungrat:
Glycerol ethers synthesis from glycerol etherification with tert-butyl alcohol in reactive distillation. 2034-2043 - Jozsef Gáspár, Ana-Maria Cormos:
Dynamic modeling and validation of absorber and desorber columns for post-combustion CO2 capture. 2044-2052 - Tilman Barz, Stefan Kuntsche, Günter Wozny, Harvey Arellano-Garcia:
An efficient sparse approach to sensitivity generation for large-scale dynamic optimization. 2053-2065 - Nadja Hvala, Fernando Aller, Teodora Miteva, Dolores Kukanja:
Modelling, simulation and control of an industrial, semi-batch, emulsion-polymerization reactor. 2066-2080 - G. D. Molina, D. A. R. Zumoffen, Marta S. Basualdo:
Plant-wide control strategy applied to the Tennessee Eastman process at two operating points. 2081-2097 - Florian Fabre, Gilles Hétreux, Jean-Marc Le Lann, Pascale Zaraté:
Dynamic hybrid simulation of batch processes driven by a scheduling module. 2098-2112 - Qingning Shen, Feng Chu, Haoxun Chen:
A Lagrangian relaxation approach for a multi-mode inventory routing problem with transshipment in crude oil transportation. 2113-2123 - John M. Wassick, Jeff Ferrio:
Extending the resource task network for industrial applications. 2124-2140 - Yu Miao, Hongye Su, Wei Wang, Jian Chu:
Simultaneous data reconciliation and joint bias and leak estimation based on support vector regression. 2141-2151 - H. Kruggel-Emden, Frantisek Stepánek, A. Munjiza:
Performance of integration schemes in discrete element simulations of particle systems involving consecutive contacts. 2152-2157
Volume 35, Number 11, November 2011
- Gabriela C. Lopes, Leonardo M. Rosa, Milton Mori, José R. Nunhez, Waldir P. Martignoni:
Three-dimensional modeling of fluid catalytic cracking industrial riser flow and reactions. 2159-2168 - Anthony Wachs:
Rising of 3D catalyst particles in a natural convection dominated flow by a parallel DNS method. 2169-2185 - Paulo L. C. Lage:
On the representation of QMOM as a weighted-residual method - The dual-quadrature method of generalized moments. 2186-2203 - Evren Bayraktar, Otto Mierka, F. Platte, Dmitri Kuzmin, Stefan Turek:
Numerical aspects and implementation of population balance equations coupled with turbulent fluid dynamics. 2204-2217 - Gregory T. Jasion, John S. Shrimpton, Matthew Danby, K. Takeda:
Performance of numerical integrators on tangential motion of DEM within implicit flow solvers. 2218-2226 - Ravi N. Methekar, Venkatasailanathan Ramadesigan, J. Carl Pirkle Jr., Venkat R. Subramanian:
A perturbation approach for consistent initialization of index-1 explicit differential-algebraic equations arising from battery model simulations. 2227-2234 - Vijay Gupta, Ignacio E. Grossmann:
Solution strategies for multistage stochastic programming with endogenous uncertainties. 2235-2247 - Martina Roso, Alessandra Lorenzetti, Stefano Besco, Manuel Monti, Guido Berti, Michele Modesti:
Application of empirical modelling in multi-layers membrane manufacturing. 2248-2256 - Stefan Kuntsche, Tilman Barz, R. Kraus, Harvey Arellano-Garcia, Günter Wozny:
MOSAIC a web-based modeling environment for code generation. 2257-2273 - Cristian R. Muzzio, Nicolás G. Dini:
Simulation of freezing step in vial lyophilization using finite element method. 2274-2283 - Marija B. Tasic, Vlada B. Veljkovic:
Simulation of fuel ethanol production from potato tubers. 2284-2293 - Shumaila Javeed, Shamsul Qamar, Andreas Seidel-Morgenstern, Gerald Warnecke:
Efficient and accurate numerical simulation of nonlinear chromatographic processes. 2294-2305 - Chunlei Ruan, Jie Ouyang, Shuaiqiang Liu, Lin Zhang:
Computer modeling of isothermal crystallization in short fiber reinforced composites. 2306-2317 - Stefania Tronci, Massimiliano Grosso, Roberto Baratti, José A. Romagnoli:
A stochastic approach for the prediction of PSD in crystallization processes: Analytical solution for the asymptotic behavior and parameter estimation. 2318-2325 - Pablo Marín, Salvador Ordóñez, Fernando V. Díez:
Rational design of heating elements using CFD: Application to a bench-scale adiabatic reactor. 2326-2333 - Jerzy Szczygiel:
Optimising the porous structure of heterogeneous reforming catalysts with a globular model of the grain. 2334-2350 - Hallas Pakravesh, Akbar Shojaei:
Optimization of industrial CSTR for vinyl acetate polymerization using novel shuffled frog leaping based hybrid algorithms and dynamic modeling. 2351-2365 - Sudhakar Jonnalagadda, Balaji Balagurunathan, Rajagopalan Srinivasan:
Graph theory augmented math programming approach to identify minimal reaction sets in metabolic networks. 2366-2377 - Giovanni Manenti:
A calculation procedure for a heat exchanger and bypass equipment. 2378-2388 - Timo Laukkanen, Carl-Johan Fogelholm:
A bilevel optimization method for simultaneous synthesis of medium-scale heat exchanger networks based on grouping of process streams. 2389-2400 - G. Modla:
Reactive pressure swing batch distillation by a new double column system. 2401-2410 - Chaowei Liu, Jie Fu, Qiang Xu:
Simultaneous mixed-integer dynamic optimization for environmentally benign electroplating. 2411-2425 - Hossein Khodadadi, Hooshang Jazayeri-Rad:
Applying a dual extended Kalman filter for the nonlinear state and parameter estimations of a continuous stirred tank reactor. 2426-2436 - T. Ginsberg, Michael Modigell:
Dynamic modelling of a rotary kiln for calcination of titanium dioxide white pigment. 2437-2446 - Giuseppe Napoli, Maria Gabriella Xibilia:
Soft Sensor design for a Topping process in the case of small datasets. 2447-2456 - Nazatul Aini Abd Majid, Mark P. Taylor, John J. J. Chen, Brent R. Young:
Multivariate statistical monitoring of the aluminium smelting process. 2457-2468 - George Simion Ostace, Mircea Vasile Cristea, Paul Serban Agachi:
Cost reduction of the wastewater treatment plant operation by MPC based on modified ASM1 with two-step nitrification/denitrification model. 2469-2479 - Mohammad Al-haj Ali, Emad M. Ali:
Effect of monomer feed and production rate on the control of molecular weight distribution of polyethylene in gas phase reactors. 2480-2490 - Flavio Manenti:
Considerations on nonlinear model predictive control techniques. 2491-2509 - Aino Ropponen, Risto Ritala, Efstratios N. Pistikopoulos:
Optimization issues of the broke management system in papermaking. 2510-2520 - Thomas Tometzki, Sebastian Engell:
Risk conscious solution of planning problems under uncertainty by hybrid multi-objective evolutionary algorithms. 2521-2539 - Andrey M. Kostin, Gonzalo Guillén-Gosálbez, Fernando D. Mele, Miguel J. Bagajewicz, Laureano Jiménez:
A novel rolling horizon strategy for the strategic planning of supply chains. Application to the sugar cane industry of Argentina. 2540-2563 - Ian Tolle, Lealon L. Martin:
Quantifying polymer structural component evolution using X-ray scattering and mixed-integer network component analysis. 2564-2578 - Beverly V. Smith, Marianthi G. Ierapepritou:
Modeling and optimization of product design and portfolio management interface. 2579-2589
Volume 35, Number 12, December 2011
- Andreas Bode, Roman Kühner, Thomas Wisniewski:
Identification of economic potentials in production processes: An industrial case study. 2591-2601 - Michail Stamatakis, Dionisios G. Vlachos:
Equivalence of on-lattice stochastic chemical kinetics with the well-mixed chemical master equation in the limit of fast diffusion. 2602-2610 - Guanghao Hu, Zhizhong Mao, Dakuo He, Fei Yang:
Hybrid modeling for the prediction of leaching rate in leaching process based on negative correlation learning bagging ensemble algorithm. 2611-2617 - P. J. Edge, Peter J. Heggs, Mohamed Pourkashanian, A. Williams:
An integrated computational fluid dynamics-process model of natural circulation steam generation in a coal-fired power plant. 2618-2631 - Nikolaos Cheimarios, E. D. Koronaki, Andreas G. Boudouvis:
Enabling a commercial computational fluid dynamics code to perform certain nonlinear analysis tasks. 2632-2645 - R. J. Byron Smith, L. Muruganandam, S. Murthy Shekhar:
CFD analysis of low temperature water gas shift reactor. 2646-2652 - Luiz Fernando L. R. Silva, Paulo L. C. Lage:
Development and implementation of a polydispersed multiphase flow model in OpenFOAM. 2653-2666 - Karthik Subramanyan, Urmila M. Diwekar, Stephen E. Zitney:
Stochastic modeling and multi-objective optimization for the APECS system. 2667-2679 - William Martin Barrett Jr., Jasper van Baten, Todd Martin:
Implementation of the waste reduction (WAR) algorithm utilizing flowsheet monitoring. 2680-2686 - Gonzalo A. Núñez, Claudio A. Gelmi, José M. del Valle:
Simulation of a supercritical carbon dioxide extraction plant with three extraction vessels. 2687-2695 - David J. Widenski, Ali Abbas, José A. Romagnoli:
A model-based nucleation study of the combined effect of seed properties and cooling rate in cooling crystallization. 2696-2705 - Rodrigo J. G. Lopes, Rosa M. Quinta-Ferreira:
Numerical assessment of diffusion-convection-reaction model for the catalytic abatement of phenolic wastewaters in packed-bed reactors under trickling flow conditions. 2706-2715 - Satish R. Inamdar, I. A. Karimi, S. J. Parulekar, B. D. Kulkarni:
A sharp cut algorithm for optimization. 2716-2728 - Juan P. Ruiz, Ignacio E. Grossmann:
Using redundancy to strengthen the relaxation for the global optimization of MINLP problems. 2729-2740 - Adriano Pinto Mariano, Caliane Bastos Borba Costa, Eduardo Coselli Vasco de Toledo, Delba Nisi Cosme Melo, Rubens Maciel Filho:
Analysis of the particle swarm algorithm in the optimization of a three-phase slurry catalytic reactor. 2741-2749 - Sylvain Mouret, Ignacio E. Grossmann, Pierre Pestiaux:
A new Lagrangian decomposition approach applied to the integration of refinery planning and crude-oil scheduling. 2750-2766 - A. A. Bumann, Stavros Papadokonstantakis, Ulrich Fischer, Konrad Hungerbühler:
Investigating the use of path flow indicators as optimization drivers in batch process retrofitting. 2767-2785 - Abhishek Jayswal, Xiang Li, Anand Zanwar, Helen H. Lou, Yinlun Huang:
A sustainability root cause analysis methodology and its application. 2786-2798 - Emanuele Martelli, Edoardo Amaldi, Stefano Consonni:
Numerical optimization of heat recovery steam cycles: Mathematical model, two-stage algorithm and applications. 2799-2823 - Omobolanle Adekola, Thokozani Majozi:
Wastewater minimization in multipurpose batch plants with a regeneration unit: Multiple contaminants. 2824-2836 - Luis Fernando Lira-Barragán, José María Ponce-Ortega, Medardo Serna-González, Mahmoud M. El-Halwagi:
Synthesis of water networks considering the sustainability of the surrounding watershed. 2837-2852 - Raluca Tudor, Vasile Lavric:
Dual-objective optimization of integrated water/wastewater networks. 2853-2866 - Silvina I. Biagiola, José L. Figueroa:
Identification of uncertain MIMO Wiener and Hammerstein models. 2867-2875 - Mehdi Berreni, Meihong Wang:
Modelling and dynamic optimization of thermal cracking of propane for ethylene manufacturing. 2876-2885 - Brahim Benyahia, M. Abderrazak Latifi, Christian Fonteix, Fernand Pla:
Multicriteria dynamic optimization of an emulsion copolymerization reactor. 2886-2895 - Anton A. Kiss, Rohit R. Rewagad:
Energy efficient control of a BTX dividing-wall column. 2896-2904 - Guangdong Tian, Jiangwei Chu, Yumei Liu, Hua Ke, Xin Zhao, Guan Xu:
Expected energy analysis for industrial process planning problem with fuzzy time parameters. 2905-2912 - Sebastian Terrazas-Moreno, Philipp A. Trotter, Ignacio E. Grossmann:
Temporal and spatial Lagrangean decompositions in multi-site, multi-period production planning problems with sequence-dependent changeovers. 2913-2928 - Georgios M. Kopanos, Luis Puigjaner, Michael C. Georgiadis:
Resource-constrained production planning in semicontinuous food industries. 2929-2944 - Manojkumar Ramteke, Rajagopalan Srinivasan:
Novel genetic algorithm for short-term scheduling of sequence dependent changeovers in multiproduct polymer plants. 2945-2959 - Adrián M. Aguirre, Carlos A. Méndez, Pedro M. Castro:
A novel optimization method to automated wet-etch station scheduling in semiconductor manufacturing systems. 2960-2972 - Luis Zeballos, Juan M. Novas, Gabriela P. Henning:
A CP formulation for scheduling multiproduct multistage batch plants. 2973-2989 - Naresh Susarla, I. A. Karimi:
Integrated campaign planning and resource allocation in batch plants. 2990-3001 - Rodolfo G. Dondo, Carlos A. Méndez, Jaime Cerdá:
The multi-echelon vehicle routing problem with cross docking in supply chain management. 3002-3024 - Michael Binns, Constantinos Theodoropoulos:
An integrated knowledge-based approach for modelling biochemical reaction networks. 3025-3043 - Alain Haït, Christian Artigues:
On electrical load tracking scheduling for a steel plant. 3044-3047
a service of 
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-04-18 20:20 CEST by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
